Not unless you power the empeg through the sled. If there is a connector in the jack on the back of the unit, it assumes it's at home and removes all the 4 channel options.

Is this a hardware or a software issue? If it is software, could this be made overrideable either via emplode, .ini file or empegs menu? Would really be great.
I know I would still have to deal with two problems:

1. connecting the empeg in the additional sled needed i.e. connecting the power like normally done outside the car, and


2. connecting the sled´s cables to my stereo, with conversion from 4V to 1V outs.

Anything else?

cu,
sven